SPLITTING WATER INTO H2 AND O ~ WOW!!!

WATER SPLIT LIGHT
We all know that water is made up of atoms of hydrogen and oxygen, which are chemically combined in the ratio of two hydrogen atoms for every oxygen atom. It usually has a bluish tint and its also tasteless and odourless, but now remarkably a device uses light to split water into clean burning hydrogen.

The following excerpts are from the article, “Device uses light to split water into clean hydrogen”, posted by Mark Shwartz-Stanford, November 15, 2013

CARThe water splitter is a silicon semiconductor coated in an ultrathin layer of nickel and it could help pave the way for large-scale production of clean hydrogen fuel from sunlight, according to the researchers. Their results are published in the journal Science.  The goal is to supplement solar cells with hydrogen-powered fuel cells that can generate electricity when the sun isn’t shining or demand is high.

IMAGEThe image above shows two electrodes connected via an external voltage source splitting water into oxygen(O2) and hydrogen(H2). The illuminated silicon electrode (left) uses light energy to assist in the water-splitting process and is protected from the surrounding electrolyte by a 2-nm film of nickel.  (Credit: Guosong Hong, Stanford University)

Solar cells only work when the sun is shining,” says study co-author Hongjie Dai, a professor of chemistry at Stanford University. “When there’s no sunlight, utilities often have to rely on electricity from conventional power plants that run on coal or natural gas.”   A greener solution, Dai says, is to supplement the solar cells with hydrogen-powered fuel cells that generate electricity at night or when demand is especially high.

HOW TO SPLIT WATER
SCIENTISTSPhoto: Peichuan Shen, PhD student; Shen Zhao, PhD student; and Dr. Alexander Orlov

To produce clean hydrogen for fuel cells, scientists have turned to an emerging technology called water splitting. Two semi-conducting electrodes are connected and placed in water. The electrodes absorb light and use the energy to split the water into its basic components, oxygen and hydrogen.  The oxygen is released into the atmosphere, and the hydrogen is stored as fuel.  When energy is needed, the process is reversed. The stored hydrogen and atmospheric oxygen are combined in a fuel cell to generate electricity and pure water.   The entire process is sustainable and emits no greenhouse gases. But finding a cheap way to split water has been a major challenge…
SILICON SOLUTION
“Silicon, which is widely used in solar cells, would be an ideal, low-cost material,” says Stanford graduate student Michael J. Kenney, co-lead author of the Science study. “But silicon degrades in contact with an electrolyte solution… In STANDFORD U2011, another Stanford research team addressed this challenge by coating silicon electrodes with ultrathin layers of titanium dioxide and iridium. That experimental water splitter produced hydrogen and oxygen for eight hours without corroding.  “Those were inspiring results, but for practical water splitting, longer-term stability is needed,” Dai says. “Also, the precious metal iridium is costly. A non-precious metal catalyst would be desirable.”  To find a low-cost alternative, Dai suggested that Kenney and his colleagues try coating silicon electrodes with ordinary nickel.  “Nickel is corrosion-resistant,” Kenney says. “It’s also an active oxygen-producing catalyst, and it’s earth-abundant. That makes it very attractive for this type of application.”
NICKEL NANOFILM
For the experiment, the Dai team applied a 2-nanometer-thick layer of nickel onto a silicon electrode, paired it with another electrode, and placed both in a solution of water and potassium borate.  When light and electricity were applied, the electrodes began splitting the water into oxygen and hydrogen, a process that continued for about 24 hours with no sign of corrosion.  To improve performance, the researchers mixed lithium into the water-based solution. “Remarkably, adding lithium imparted superior stability to the electrodes,” Kenney says. “They generated hydrogen and oxygen continuously for 80 hours—more than three days—with no sign of surface corrosion.” … “Our lab has produced one of the longest lasting silicon-based photoanodes,” he says. “The results suggest that an ultrathin nickel coating not only suppresses corrosion but also serves as an electrocatalyst to expedite the otherwise sluggish water-splitting reaction… The scientists plan to do additional work on improving the stability and durability of nickel-treated electrodes of silicon as well as other materials.  The Precourt Institute for Energy and the Global Climate and Energy Project at Stanford and the National Science Foundation funded the work.

Article link – http://www.futurity.org/device-uses-light-split-water-clean-hydrogen/?utm_source=Futurity+Today&utm_campaign=aa7a65b600-November_15_201311_15_2013&utm_medium=email&utm_term=0_e34e8ee443-aa7a65b600-206319993

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s